Study of planar structure applying reciprocity technique combined with MGEC and analysis of discontinuity

The 3D structure electromagnetic computation presents several difficulties related to the volume mesh. In fact, the entire volume space must be taken into account even the smallest details. In this article, we propose a formulation based on the reciprocity theorem combined with the generalized equivalent circuit method to model a planar 3D structure with both coaxial and planar excitation. The major advantage of this formulation is the fact to reduce the computational volume into 2D ones in the discontinuity plane. In addition, we focused on the calculation of the discontinuity between the excitation source and the planar structure to determine the exact behavior of the electric coaxial excitation model. The obtained current density, electric field distributions, and the input impedance are presented and discussed in the following sections. An approximately good agreement of input impedance with those obtained by the simulator and measurement is shown.     

Evaluation of dynamic modulus measurement for C/C-SiC composites at different temperatures

The determination of elastic properties at application temperature is fundamental for the design of fibre reinforced ceramic composite components. An attractive method to characterize the flexural modulus at room and high temperature under specific atmosphere is the nondestructive Resonant Frequency Damping Analysis (RFDA). The objective of this paper was to evaluate and validate the modulus measurement via RFDA for orthotropic C/C-SiC composites at the application temperature. At room temperature flexural moduli of C/C-SiC with 0/90° reinforcement were measured under quasi-static 4-point bending loads and compared with dynamic moduli measured via RFDA longitudinally to fibre direction. The dynamic modulus of C/C-SiC was then measured via RFDA up to 1250°C under flowing inert gas and showed an increase with temperature which fitted with literature values. The measured fundamental frequencies were finally compared to those resulting from numerical modal analyses. Dynamic and quasi-static flexural moduli are comparable and the numerical analyses proved that bending modes are correctly modeled by means of dynamic modulus measured via RFDA. The nondestructive RFDA as well as the numerical modeling approach are suitable for evaluation of C/C-SiC and may be transferred to other fibre reinforced ceramic composite materials.     

2-Phenyloxazole-4-carboxamide as a Scaffold for Selective Inhibition of Human Monoamine Oxidase B

A series of 2-phenyloxazoles bearing an amide group at position 4 were designed and synthesized for evaluation as potential inhibitors of human recombinant monoamine oxidases (hrMAOs). Results of kinetics experiments demonstrated that all compounds behave as competitive MAO inhibitors, with good selectivity toward the MAO-B isoform. The most potent and selective derivatives are characterized by inhibition constant (K_i) values in the sub-micromolar range and a good selectivity index (K_{i MAO-A}/K_{i MAO-B}>50). Some derivatives were also found to be able to inhibit MAO activity in nerve growth factor (NGF)-differentiated PC12 cells, taken as a model of neuronal cells. In particular, 2-(2-hydroxyphenyl)-N-phenyloxazole-4-carboxamide (compound 4 a ) may be a promising new scaffold, exerting the highest selectivity and inhibitory effect toward MAOs in NGF-differentiated PC12 cell lysates, without compromising cell viability. Molecular docking analysis allowed a rationalization of the experimentally observed binding affinity and selectivity.     

Artistic Augmentation of Photographs with Droplets

Journal of Computer Science and Technology - Artistic augmentation of photographs with water droplets aims at generating aesthetic yet realistic images, and thus differs from traditional augmented...     

旗袍三围规格的优化设计研究

旗袍需要拥有合身的廓形,贴体程度要求高且强调人体曲线美感,而旗袍的松量设计直接影响其外观造型的优美程度及穿着舒适感。文章首先采用正交实验法针对相同款式旗袍设计了9种不同水平组合的三围松量设置方案,并制作成相同款式不同三围规格的旗袍样衣;然后利用心理学标尺,对9件旗袍样衣的静态造型和穿着舒适感分别进行主观评价,并利用直观分析法和方差分析法综合分析主观评价结果;最后对分析结果进行验证,最终找出外观造型优美程度高和穿着舒适感佳的三围松量水平组合,为旗袍三围规格的优化设计提供理论依据。     

老矿山残矿资源回收方案设计中三维探测及建模技术的应用

目前我国绝大多数中小型老矿山残矿回收面临一系列问题，包括资料缺失无法准确判定老采空区及剩余资源位置，无法准确掌握剩余资源形态及可回收量，回收方案设计与实际资源相差较大等。通过将三维探测及建模技术应用于老矿山残矿资源精准定位及回收方案设计中，有助于解决以上问题。以福建浦城屏峰硫铅锌矿为例，通过对老采空区采用三维激光扫描构建采空区三维模型，结合三维建模计算，构建了目前可回收的剩余资源三维模型。通过模型划分及切割，按照矿体实际形态，在三维模型中布设采切及穿孔工程，并将其导入平面施工图中，不仅可以减少设计工作量，而且能够精准匹配矿体，减少设计偏差。由于周边存在大量老采空区，为保障安全，在采空区及剩余资源精准三维模型的基础上，制定了采空区稳定性监测方案，布设了监测传感器，保障了资源回收安全。     

Automated classification of simulated wind field patterns from multiphysics ensemble forecasts

In this study, we have proposed an automated classification approach to identify meaningful patterns in wind field data. Utilizing an extensive simulated wind database, we have demonstrated that the proposed approach can identify low‐level jets, near‐uniform profiles, and other patterns in a reliable manner. We have studied the dependence of these wind profile patterns on locations (eg, offshore vs onshore), seasons, and diurnal cycles. Furthermore, we have found that the probability distributions of some of the patterns depend on the underlying planetary boundary layer schemes in a significant way. The future potential of the proposed approach in wind resource assessment and, more generally, in mesoscale model parameterization improvement is touched upon in this paper.